Template

PACT Job Safety Assessment Sheet

by Jason Gilbert, from the Community

The PACT Job Safety Assessment Sheet is a practical checklist to confirm a site is safe and ready before work starts. It guides teams to identify hazards, assess risks, and implement suitable controls, with sections on working at heights, fall arrest systems, ladder safety, manual handling, unloading and lifting assistance, and corrective actions. It is intended as a starting point for on site safety reviews and must be adapted to your workplace and local requirements.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Task Risk Assessment Template
Use this Task Risk Assessment template to assess hazards and control measures before starting work. It guides teams through PPE requirements and common high-risk activities including arrival on site, chemical handling, manual and power tools, working in and around sewers and excavations, operating excavators, unloading equipment, manual handling, ladder use, working near traffic, working at heights, scaffolding, and hot work. Capture initial and residual risk ratings, assign controls, and document personnel and signatures to meet construction site safety requirements and SWMS needs.
by Graeme McMillan, from the Community
Downloads: 20+
Get
Template
Edwards Inc. Construction Site Safety Audit
This comprehensive workplace safety inspection checklist provides a systematic approach to evaluating job site safety across 13 critical areas. It covers essential aspects including job task planning, working at heights, tools and equipment safety, scaffolding requirements, lifting operations, ladder safety, hazardous chemical handling, emergency response protocols, PPE compliance, work environment conditions, electrical safety, environmental considerations, and administrative procedures. The checklist serves as a crucial tool for safety officers, site supervisors, and managers to ensure workplace compliance with safety regulations, identify potential hazards, and implement necessary corrective actions. Each section includes detailed items for inspection, making it an invaluable resource for maintaining a safe work environment and protecting worker well-being.
by Jeff Smith Edwards, Inc., from the Community
Downloads: 60+
Get
Template
Job STOP Assessment Checklist
Use this Job STOP Assessment for service technicians to perform pre-job checks, identify hazards, and verify controls before starting work. Cover PPE, tools, working at heights, lifting gear, electrical risks, confined spaces, and environmental conditions. Document rescue plans, assess remaining risk, and record lessons learned at job closeout to improve safety and HSE compliance across customer sites.
by Terex Corporation, from the Community
Downloads: 20+
Get
Template
Work at Heights Risk Review Checklist
Use this work at heights risk review checklist to assess and control hazards before starting elevated tasks. The template guides supervisors and workers through confirming training and competencies, reviewing a risk assessment and the hierarchy of controls, establishing a rescue plan, and verifying suitable anchorage points. It prompts inspection of work platforms and scaffolds, fall prevention and arrest equipment, tool lanyards and barricades for overhead work, ladder setup and condition, and controls for fragile roofs and skylights. Adapt this example to your specific site, equipment, and local regulations.
by Damian Kondoyiannis, from the Community
Downloads: 0
Get

Task Risk Assessment Template

Use this Task Risk Assessment template to assess hazards and control measures before starting work. It guides teams through PPE requirements and common high-risk activities including arrival on site, chemical handling, manual and power tools, working in and around sewers and excavations, operating excavators, unloading equipment, manual handling, ladder use, working near traffic, working at heights, scaffolding, and hot work. Capture initial and residual risk ratings, assign controls, and document personnel and signatures to meet construction site safety requirements and SWMS needs.

by Graeme McMillan, from the Community

20+

Get

Template

Edwards Inc. Construction Site Safety Audit

This comprehensive workplace safety inspection checklist provides a systematic approach to evaluating job site safety across 13 critical areas. It covers essential aspects including job task planning, working at heights, tools and equipment safety, scaffolding requirements, lifting operations, ladder safety, hazardous chemical handling, emergency response protocols, PPE compliance, work environment conditions, electrical safety, environmental considerations, and administrative procedures. The checklist serves as a crucial tool for safety officers, site supervisors, and managers to ensure workplace compliance with safety regulations, identify potential hazards, and implement necessary corrective actions. Each section includes detailed items for inspection, making it an invaluable resource for maintaining a safe work environment and protecting worker well-being.

by Jeff Smith Edwards, Inc., from the Community

60+

Get

Template

Job STOP Assessment Checklist

Use this Job STOP Assessment for service technicians to perform pre-job checks, identify hazards, and verify controls before starting work. Cover PPE, tools, working at heights, lifting gear, electrical risks, confined spaces, and environmental conditions. Document rescue plans, assess remaining risk, and record lessons learned at job closeout to improve safety and HSE compliance across customer sites.

by Terex Corporation, from the Community

20+

Get

Template

Work at Heights Risk Review Checklist

Use this work at heights risk review checklist to assess and control hazards before starting elevated tasks. The template guides supervisors and workers through confirming training and competencies, reviewing a risk assessment and the hierarchy of controls, establishing a rescue plan, and verifying suitable anchorage points. It prompts inspection of work platforms and scaffolds, fall prevention and arrest equipment, tool lanyards and barricades for overhead work, ladder setup and condition, and controls for fragile roofs and skylights. Adapt this example to your specific site, equipment, and local regulations.

by Damian Kondoyiannis, from the Community

Get

PACT Job Safety Assessment Sheet

About author

You might also like

Task Risk Assessment Template

Edwards Inc. Construction Site Safety Audit

Job STOP Assessment Checklist

Work at Heights Risk Review Checklist

You might also like

Task Risk Assessment Template

Edwards Inc. Construction Site Safety Audit

Job STOP Assessment Checklist

Work at Heights Risk Review Checklist