Template

Mobile Access Tower Thorough Inspection Checklist

by Dave Burrows, from the Community

30+

Perform a thorough inspection of mobile access towers in line with Work at Height Regulations 2005, PUWER 1998, and EN 1004. This checklist guides competent persons through verifying identification, manuals, castors and brakes, stabilisers and clamps, braces and welds, main frames and interlocks, handrails, platforms and trapdoors, and toe boards. Record tower details, confirm component condition, and determine if the tower is safe to use.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Mobile Access Tower Inspection Checklist
This mobile access tower inspection checklist supports safe work at height and compliance with UK regulations such as the Work at Height Regulations 2005 and PUWER 1998. It guides pre site checks for PPE, permits, vehicle hygiene, and first aid supplies. Inspect identification and EN 1004 compliance, then assess castors or base plates, adjusters, braces, handrail frames, trapdoor platforms, and toe boards. Record tower details, note defects, stop work if unsafe, and confirm completion with a signature.
by Mark Howard, from the Community
Downloads: 10+
Get
Template
Mobile Tower Inspection Checklist
Use this mobile tower inspection checklist to assess scaffold towers up to 5m before first use, after alterations or events, and at least every 7 days. Confirm level ground, correct base-to-height ratio, stabilisers and braces, guardrails, platforms and toe boards, castors and brakes, safe working loads, tie-ins, and power line clearance. Include risk assessment, user briefing, manufacturer instructions, photos, and sign-off to maintain compliance and site safety.
by Gavin Musk, from the Community
Downloads: 0
Get
Template
Mobile Tower Scaffold Checklist
This mobile tower scaffold checklist helps crews verify safe setup and use of access towers. It covers inspection timing first use, after alterations or events, and at intervals not exceeding 7 days. Items include ground conditions, castors or base plates and brakes, adjustable legs for leveling only, tower levelness, stabilisers size and position, bracing pattern and hooks, handrails and mid guards, frame interlocks, platform placement and widths, trap door orientation, wind locks, toe boards, tie in methods, maximum permitted loads, power line clearances, work area cordons, and signage for incomplete towers. Capture site details, photos, PASMA references, and complete sign off with a tower tag reference.
by Mike Taylor, from the Community
Downloads: 0
Get
Template
RRL Mobile Scaffold Tower Inspection Sheet
This mobile scaffold tower inspection sheet helps a competent person verify the safety and condition of a tower before use. It covers location and identification, make and type, and inspection type. Detailed checks include castors and housings, wheel rotation and brakes, adjustable legs and threads, frame alignment and locking devices, platforms and deck condition, toe board fittings, and the integrity of outriggers and stabilizers. The form also prompts for further actions required and accountability. Intended as a practical guide to support compliance and safe work at heights, it should be adapted to your site requirements and used alongside professional advice and local regulations.
by Greg Beaver, from the Community
Downloads: 0
Get

Mobile Access Tower Inspection Checklist

This mobile access tower inspection checklist supports safe work at height and compliance with UK regulations such as the Work at Height Regulations 2005 and PUWER 1998. It guides pre site checks for PPE, permits, vehicle hygiene, and first aid supplies. Inspect identification and EN 1004 compliance, then assess castors or base plates, adjusters, braces, handrail frames, trapdoor platforms, and toe boards. Record tower details, note defects, stop work if unsafe, and confirm completion with a signature.

by Mark Howard, from the Community

10+

Get

Template

Mobile Tower Inspection Checklist

Use this mobile tower inspection checklist to assess scaffold towers up to 5m before first use, after alterations or events, and at least every 7 days. Confirm level ground, correct base-to-height ratio, stabilisers and braces, guardrails, platforms and toe boards, castors and brakes, safe working loads, tie-ins, and power line clearance. Include risk assessment, user briefing, manufacturer instructions, photos, and sign-off to maintain compliance and site safety.

by Gavin Musk, from the Community

Get

Template

Mobile Tower Scaffold Checklist

This mobile tower scaffold checklist helps crews verify safe setup and use of access towers. It covers inspection timing first use, after alterations or events, and at intervals not exceeding 7 days. Items include ground conditions, castors or base plates and brakes, adjustable legs for leveling only, tower levelness, stabilisers size and position, bracing pattern and hooks, handrails and mid guards, frame interlocks, platform placement and widths, trap door orientation, wind locks, toe boards, tie in methods, maximum permitted loads, power line clearances, work area cordons, and signage for incomplete towers. Capture site details, photos, PASMA references, and complete sign off with a tower tag reference.

by Mike Taylor, from the Community

Get

Template

RRL Mobile Scaffold Tower Inspection Sheet

This mobile scaffold tower inspection sheet helps a competent person verify the safety and condition of a tower before use. It covers location and identification, make and type, and inspection type. Detailed checks include castors and housings, wheel rotation and brakes, adjustable legs and threads, frame alignment and locking devices, platforms and deck condition, toe board fittings, and the integrity of outriggers and stabilizers. The form also prompts for further actions required and accountability. Intended as a practical guide to support compliance and safe work at heights, it should be adapted to your site requirements and used alongside professional advice and local regulations.

by Greg Beaver, from the Community

Get

Mobile Access Tower Thorough Inspection Checklist

About author

You might also like

Mobile Access Tower Inspection Checklist

Mobile Tower Inspection Checklist

Mobile Tower Scaffold Checklist

RRL Mobile Scaffold Tower Inspection Sheet

You might also like

Mobile Access Tower Inspection Checklist

Mobile Tower Inspection Checklist

Mobile Tower Scaffold Checklist

RRL Mobile Scaffold Tower Inspection Sheet