Template

LV-MV Cable Cold Commissioning Checklist

by Ricky Jones, from the Community

This LV-MV cable cold commissioning checklist helps teams verify electrical installation quality before energization. It covers cable specification compliance, installation and management, termination quality, labeling at both ends, continuity and identification checks, LV insulation resistance testing to manufacturer or ANSI/NETA ATS-2009 guidelines, MV cable testing including oversheath integrity, and verification of tight, correct connections. The template concludes with final assessment, inspection, re-inspection, acceptance, and signature sections for contractor and client.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Solar Cable Cold Commissioning
This solar cable cold commissioning checklist helps teams verify cable specification to design (e.g., red/black DC conductors), review installation and cable management, confirm terminations at both ends, check labeling and identification, perform continuity and insulation resistance tests (DC), and record final assessment with notes and signatures. Sections include site details, test equipment, inspection and re-inspection, and acceptance sign-off to support safe, compliant PV commissioning.
by Ricky Jones, from the Community
Downloads: 0
Get
Template
MV/LV Line Inspection Checklist
This comprehensive MV/LV line inspection checklist guides teams through rural electrification works before energization. It covers LV and MV surveys, bush clearing, pole installation and dressing, conductor stringing, stays, meter connections, transformer mounting and dressing, earthing, and safety signage. Use it to document findings, record measurements, and secure approvals from contractors, consultants, TANESCO, and REA.
by Kassim Ngoroka, from the Community
Downloads: 0
Get
Template
Comm Cable Cold Commissioning Checklist
This communications cable cold commissioning checklist helps teams verify installation quality and readiness of signal, Ethernet, and fiber cabling before handover. Sections cover site details, equipment identification, cable specification compliance with project design, installation and management, terminations, labeling, continuity and ID checks, Ethernet pinout and continuity, and optical fiber continuity and loss testing aligned with ANSI/TIA/EIA-568. Use the template to document findings, note reservations, capture contractor and client acceptance, and collect signatures for clear sign-off.
by Ricky Jones, from the Community
Downloads: 0
Get
Template
MV PIX Switchgear Finishing Checklist
This MV PIX switchgear finishing inspection checklist helps teams verify the final assembly and quality of medium voltage cubicles. Sections cover identity and documentation, LV and MV doors, front and rear views, nameplates and labeling, interlocks and rack in or out mechanism, busbars and busbar connections, earthing box and keylock, VT and CT compartments including serial numbers and connections, arrester, gland plate and heater, cable area, bushings, and overall condition. Use it to record serial numbers, capture photos, and collect sign offs for checked by and approved by before commissioning or handover.
by Agung Laksono, from the Community
Downloads: 0
Get

Solar Cable Cold Commissioning

This solar cable cold commissioning checklist helps teams verify cable specification to design (e.g., red/black DC conductors), review installation and cable management, confirm terminations at both ends, check labeling and identification, perform continuity and insulation resistance tests (DC), and record final assessment with notes and signatures. Sections include site details, test equipment, inspection and re-inspection, and acceptance sign-off to support safe, compliant PV commissioning.

by Ricky Jones, from the Community

Get

Template

MV/LV Line Inspection Checklist

This comprehensive MV/LV line inspection checklist guides teams through rural electrification works before energization. It covers LV and MV surveys, bush clearing, pole installation and dressing, conductor stringing, stays, meter connections, transformer mounting and dressing, earthing, and safety signage. Use it to document findings, record measurements, and secure approvals from contractors, consultants, TANESCO, and REA.

by Kassim Ngoroka, from the Community

Get

Template

Comm Cable Cold Commissioning Checklist

This communications cable cold commissioning checklist helps teams verify installation quality and readiness of signal, Ethernet, and fiber cabling before handover. Sections cover site details, equipment identification, cable specification compliance with project design, installation and management, terminations, labeling, continuity and ID checks, Ethernet pinout and continuity, and optical fiber continuity and loss testing aligned with ANSI/TIA/EIA-568. Use the template to document findings, note reservations, capture contractor and client acceptance, and collect signatures for clear sign-off.

by Ricky Jones, from the Community

Get

Template

MV PIX Switchgear Finishing Checklist

This MV PIX switchgear finishing inspection checklist helps teams verify the final assembly and quality of medium voltage cubicles. Sections cover identity and documentation, LV and MV doors, front and rear views, nameplates and labeling, interlocks and rack in or out mechanism, busbars and busbar connections, earthing box and keylock, VT and CT compartments including serial numbers and connections, arrester, gland plate and heater, cable area, bushings, and overall condition. Use it to record serial numbers, capture photos, and collect sign offs for checked by and approved by before commissioning or handover.

by Agung Laksono, from the Community

Get

LV-MV Cable Cold Commissioning Checklist

About author

You might also like

Solar Cable Cold Commissioning

MV/LV Line Inspection Checklist

Comm Cable Cold Commissioning Checklist

MV PIX Switchgear Finishing Checklist

You might also like

Solar Cable Cold Commissioning

MV/LV Line Inspection Checklist

Comm Cable Cold Commissioning Checklist

MV PIX Switchgear Finishing Checklist