Template

Gas Boiler Installation Job Walk Checklist

by Matthew Skeels, from the Community

20+

This job walk checklist supports gas boiler installation teams from first arrival to final handover. It covers customer briefing and consent, confirming locations for the boiler, pipework, flue, condensate, radiators, and controls. It verifies property protection measures, documents handover actions and user instruction, and lists required certificates and removal of old equipment. A site specific risk assessment section addresses parking, slips and trips, manual handling, working at height, fragile surfaces, falling objects, electrical safety and isolation, gas isolation, vibration, hazardous substances, dust, fire readiness, asbestos awareness, noise, lone working, children and pets on site, and access issues. It also includes reminders for PPE, tools and equipment checks, calibration, signage, housekeeping, and scaffold or ladder safety.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Boiler Installation Survey Checklist
This boiler installation survey checklist helps heating engineers and installers assess properties before a boiler replacement or new install. Capture photos of the existing boiler, proposed location, flue and condensate runs, and electrical spur. Record flue type and fittings, condensate pipework, gas run upgrades, scaffolding needs, and required parts. Note radiator and control details, TRVs, system type, and whether a powerflush is needed. Summarize the new boiler make and model, final position, and compliance considerations for a safe, efficient installation.
by Colin Albut, from the Community
Downloads: 0
Get
Template
Post-Completion Boiler Audit Sheet
This post-completion boiler audit sheet guides auditors and engineers through key gas safety checks after a job is complete. It covers boiler make and model, GC number, electrical safety including fuse rating, safe isolation and preliminary tests, flue construction and performance, ventilation, operating pressure and heat input, inlet working pressure, flue gas analysis and FSD testing, condensate and pressure relief pipework, tightness testing and disturbed joints, system bleeding and control checks. It also includes sections for identifying unsafe situations, documenting job completion steps, issuing safety advice or warning notices, labeling, appliance isolation, customer satisfaction and handover, Gas Safe ID verification, and sign-off with audit result.
by Andrew Hague, from the Community
Downloads: 10+
Get
Template
Heating Survey Checklist
This heating survey template guides engineers through assessing and planning a gas boiler replacement. It captures customer details, access and parking, building height and regulations, and authorization. Record existing appliance make and model, flue and condensate routes, asbestos risks, and reasons for replacement. Specify the new boiler location, service proximity, gas supply, and required pipework. Note electrical requirements, shower compatibility, scaffold needs, and HGV access. Select flue and condensate options, list radiator requirements, and document materials. Includes customer briefing and confirmation of work scope.
by Paul Nielson, from the Community
Downloads: 20+
Get
Template
Liberty Gas Engineer Audit Checklist
This gas engineer audit checklist helps supervisors assess field operatives across safety, quality, and compliance. It covers operative appearance and ID, PPE availability and condition, hand and power tools including PAT and calibration, work at height equipment and ladder registers, site housekeeping and public protection, COSHH controls and documentation, and vehicle inspections from lights and tyres to first aid kits and extinguishers. It also verifies gas safety tasks such as tightness tests, meter and boiler inlet pressures, and electrical safety checks. The template includes sections for documentation, customer satisfaction, and signatures to capture accountability and follow-up actions.
by Mat Smith, from the Community
Downloads: 30+
Get

Gas Boiler Installation Job Walk Checklist

About author

You might also like

Boiler Installation Survey Checklist

Post-Completion Boiler Audit Sheet

Heating Survey Checklist

Liberty Gas Engineer Audit Checklist

You might also like

Boiler Installation Survey Checklist

Post-Completion Boiler Audit Sheet

Heating Survey Checklist

Liberty Gas Engineer Audit Checklist