Skip to content
SafetyCulture
Template

SIDERISE RH and RV Cavity Barriers Installation

by Alex Dobra, from the Community

Downloads: 0
Get this template

This checklist supports site supervisors installing SIDERISE RH and RV cavity fire barriers. It covers vertical barriers cut to void size with compression allowance, correct cut direction, bracket placement and spacing, pressing onto brackets, and sealing all joints with RFT 120/45 foil tape. Horizontal barriers include width selection for the void, fixing to the substrate with specified bracket spacing and orientation, trimming and folding bracket ends, ensuring mitred corners with continuous intumescent, and tight abutments with sealed joints. For doors and windows, extend verticals beyond openings and set horizontals above and below, tightly abutted and sealed. Finish with clean work areas and sign-off by contractor and client.

With SafetyCulture you can

Digitize any process, procedure or policy
Eliminate mistakes made by paper-based processes
Create and share professional reports instantly
Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy
Eliminate mistakes made by paper-based processes
Create and share professional reports instantly
Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .