Template

ITP QA Checklist for Bored Piers, Capping Beams, Shotcrete

by Richard Te Paa, from the Community

Use this ITP QA checklist to plan and document quality controls for bored piers, capping beams, and shotcrete. Cover set out, service locates, geotechnical approval, reinforcement checks, concrete mix and volume, pump booking, engineer inspections, and post pour dockets, photos, and survey reports. Ideal for civil and structural works to standardize inspections and improve compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
ITP QA Checklist for Suspended Slab Works
This ITP QA template guides quality assurance for suspended slab works from pre-pour to post-pour. It covers verification of current drawings, concrete mix and volume, booking of tests and pump, detailed formwork checks including soffit heights, edges, penetrations, rebates and set downs, safety access, and cast-in items. Reinforcement checks include cover, laps, spacing, starter bars, dowels, shear reinforcement, and engineer sign-off. Post-pour documentation includes dockets, photos, location mark-ups, and surveyor or building reports.
by Rachel McDermott, from the Community
Downloads: 10+
Get
Template
Conco Daily Time Sheet Shotcrete
Shotcrete
by Chuck Chartrey, from the Community
Downloads: 60+
Get
Template
Slab on Ground, Footings, Piers Checklist
Use this Slab on Ground, Footings, and Piers checklist to inspect residential foundations, car parks, and industrial slabs. Sections cover beams, slabs, joints, pad and strip footings, and piers. Verify reinforcement and laps, dowels and epoxy, mesh placement and cover, formwork depth, saw cuts, bar placement at corners, and groundwater requirements. Capture comments, approvals, and signatures to document compliance and quality before concrete pour.
by Cameron Landreth, from the Community
Downloads: 0
Get
Template
ITC Bored Pier Inspection & Test Checklist
This ITC Bored Pier inspection and test checklist supports quality control for bored pier works. Verify clean and stable foundations, geotechnical approvals, hole diameter and depth, and above-ground formwork bracing. Check reinforcement cover, spacing, and cleanliness; dowel sizes and embedment; and HD bolts and ferrules, including templates and earthing. Confirm concrete grade and delivery (e.g., N25), adequate mechanical vibration, and finished surface. Capture photos as evidence, record deficiencies and comments, and complete supervisor acceptance with signature to confirm compliance with drawings, specifications, and standards.
by Daryl Williams, from the Community
Downloads: 0
Get

ITP QA Checklist for Suspended Slab Works

This ITP QA template guides quality assurance for suspended slab works from pre-pour to post-pour. It covers verification of current drawings, concrete mix and volume, booking of tests and pump, detailed formwork checks including soffit heights, edges, penetrations, rebates and set downs, safety access, and cast-in items. Reinforcement checks include cover, laps, spacing, starter bars, dowels, shear reinforcement, and engineer sign-off. Post-pour documentation includes dockets, photos, location mark-ups, and surveyor or building reports.

by Rachel McDermott, from the Community

10+

Get

Template

Conco Daily Time Sheet Shotcrete

Shotcrete

by Chuck Chartrey, from the Community

60+

Get

Template

Slab on Ground, Footings, Piers Checklist

Use this Slab on Ground, Footings, and Piers checklist to inspect residential foundations, car parks, and industrial slabs. Sections cover beams, slabs, joints, pad and strip footings, and piers. Verify reinforcement and laps, dowels and epoxy, mesh placement and cover, formwork depth, saw cuts, bar placement at corners, and groundwater requirements. Capture comments, approvals, and signatures to document compliance and quality before concrete pour.

by Cameron Landreth, from the Community

Get

Template

ITC Bored Pier Inspection & Test Checklist

This ITC Bored Pier inspection and test checklist supports quality control for bored pier works. Verify clean and stable foundations, geotechnical approvals, hole diameter and depth, and above-ground formwork bracing. Check reinforcement cover, spacing, and cleanliness; dowel sizes and embedment; and HD bolts and ferrules, including templates and earthing. Confirm concrete grade and delivery (e.g., N25), adequate mechanical vibration, and finished surface. Capture photos as evidence, record deficiencies and comments, and complete supervisor acceptance with signature to confirm compliance with drawings, specifications, and standards.

by Daryl Williams, from the Community

Get

ITP QA Checklist for Bored Piers, Capping Beams, Shotcrete

About author

You might also like

ITP QA Checklist for Suspended Slab Works

Conco Daily Time Sheet Shotcrete

Slab on Ground, Footings, Piers Checklist

ITC Bored Pier Inspection & Test Checklist

You might also like

ITP QA Checklist for Suspended Slab Works

Conco Daily Time Sheet Shotcrete

Slab on Ground, Footings, Piers Checklist

ITC Bored Pier Inspection & Test Checklist