Template

Electrical Isolation Procedure and Test Sheet

by Gerrit Ballast, from the Community

10+

This isolation procedure and test sheet guides safe electrical work by documenting power isolation before and after tasks. Record job details and workers, identify the area of the installation, isolate at the main switch or final subcircuits, apply lockout kits and danger tags, and capture photos of the isolation and re-energization. Document required testing to verify circuits are de-energized and reinstated correctly. Designed to support compliance with Western Australia regulations 1991.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Isolation Procedure and Test Sheet
This electrical isolation procedure and test sheet helps workers safely isolate power, apply lockout devices and danger tags, and complete mandatory checks in compliance with Western Australia regulations. Capture photos of the main switch isolated and restored, note work areas, and verify testing such as visual inspections, earth continuity, insulation resistance, correct circuit connections, fault loop, and RCD operation. Includes switchboard sealing and labeling checks and meter number capture.
by Gerrit Ballast, from the Community
Downloads: 20+
Get
Template
High Risk Audit - Isolation Test Checklist
Use this high risk isolation audit to assess compliance with isolation and lockout procedures on construction and electrical works. Check that workers are identified on danger or out of service tags, understand the procedure, and can identify hazardous energy sources. Verify methods to isolate, test effectiveness, and manage multiple isolation points. Confirm TRA and permit requirements, assignment of an isolation coordinator, and adherence to site procedures. Ensure communication with nearby workers, completion checks before re-energizing, and documentation of observations and corrective actions.
by JUSTINE YOUL, from the Community
Downloads: 10+
Get
Template
Electrical Safe Isolation Procedure Checklist
This electrical safe isolation procedure checklist guides electricians and maintenance teams through each step required to make equipment safe before work. It covers identifying the correct point of isolation and circuit ID, selecting an appropriate isolation device based on BS7671 guidance, applying lockout tagout devices, and preventing inadvertent reinstatement. The checklist prompts verification using an approved, calibrated voltage indicator and proving unit, with photo evidence of calibration and device operation. It includes recheck steps to test before and after, securing covers, reidentifying sources, documenting actions, and formal confirmation that the system is safe to begin work. Use this template to standardize safe isolation, support compliance, and reduce risk of electric shock or unexpected energization.
by Chris Levers, from the Community
Downloads: 30+
Get
Template
High Risk Isolation Audit Checklist
This high risk isolation audit checklist helps teams verify hazardous energy controls and validate isolation effectiveness on complex worksites. It covers identifying energy sources, selecting proper isolation methods, testing single and multiple isolation points, and documenting TRA and permit requirements. The template supports assigning an isolation coordinator, communicating activities to nearby workers, and ensuring all tools are cleared and personnel are safe before re energising equipment. Use it to improve compliance and reduce risk during electrical, mechanical, and commissioning tasks.
by JUSTINE YOUL, from the Community
Downloads: 10+
Get

Isolation Procedure and Test Sheet

This electrical isolation procedure and test sheet helps workers safely isolate power, apply lockout devices and danger tags, and complete mandatory checks in compliance with Western Australia regulations. Capture photos of the main switch isolated and restored, note work areas, and verify testing such as visual inspections, earth continuity, insulation resistance, correct circuit connections, fault loop, and RCD operation. Includes switchboard sealing and labeling checks and meter number capture.

by Gerrit Ballast, from the Community

20+

Get

Template

High Risk Audit - Isolation Test Checklist

Use this high risk isolation audit to assess compliance with isolation and lockout procedures on construction and electrical works. Check that workers are identified on danger or out of service tags, understand the procedure, and can identify hazardous energy sources. Verify methods to isolate, test effectiveness, and manage multiple isolation points. Confirm TRA and permit requirements, assignment of an isolation coordinator, and adherence to site procedures. Ensure communication with nearby workers, completion checks before re-energizing, and documentation of observations and corrective actions.

by JUSTINE YOUL, from the Community

10+

Get

Template

Electrical Safe Isolation Procedure Checklist

This electrical safe isolation procedure checklist guides electricians and maintenance teams through each step required to make equipment safe before work. It covers identifying the correct point of isolation and circuit ID, selecting an appropriate isolation device based on BS7671 guidance, applying lockout tagout devices, and preventing inadvertent reinstatement. The checklist prompts verification using an approved, calibrated voltage indicator and proving unit, with photo evidence of calibration and device operation. It includes recheck steps to test before and after, securing covers, reidentifying sources, documenting actions, and formal confirmation that the system is safe to begin work. Use this template to standardize safe isolation, support compliance, and reduce risk of electric shock or unexpected energization.

by Chris Levers, from the Community

30+

Get

Template

High Risk Isolation Audit Checklist

This high risk isolation audit checklist helps teams verify hazardous energy controls and validate isolation effectiveness on complex worksites. It covers identifying energy sources, selecting proper isolation methods, testing single and multiple isolation points, and documenting TRA and permit requirements. The template supports assigning an isolation coordinator, communicating activities to nearby workers, and ensuring all tools are cleared and personnel are safe before re energising equipment. Use it to improve compliance and reduce risk during electrical, mechanical, and commissioning tasks.

by JUSTINE YOUL, from the Community

10+

Get

Electrical Isolation Procedure and Test Sheet

About author

You might also like

Isolation Procedure and Test Sheet

High Risk Audit - Isolation Test Checklist

Electrical Safe Isolation Procedure Checklist

High Risk Isolation Audit Checklist

You might also like

Isolation Procedure and Test Sheet

High Risk Audit - Isolation Test Checklist

Electrical Safe Isolation Procedure Checklist

High Risk Isolation Audit Checklist