Template

Iron Worker Contractor Safety Checklist

by Bob Weis, from the Community

This iron worker contractor safety checklist helps teams verify critical controls before and during work. It covers daily job briefings, clearance and lockout, confined space permits and air monitoring, hot work, welding and cutting, fire prevention, housekeeping, PPE, aerial lifts, fall protection, hand and power tools, and ladder use, plus notes and closing comments.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Electrician Contractors Safety Checklist
Standardize electrical contracting site safety with this comprehensive checklist. Use it to document daily job briefings, verify clearances and lockout, review confined space permits and air monitoring, control hot work, and inspect welding and cutting setups. Confirm fire prevention measures, housekeeping, and PPE including arc flash protection. Check aerial lifts and fall protection, evaluate hand and power tools with GFCI and inspection dates, and verify ladder condition and use. Ideal for supervisors and crews to improve compliance and reduce risk.
by Bob Weis, from the Community
Downloads: 0
Get
Template
Pipe Fitters Contractor Safety Checklist
This pipe fitters contractor safety checklist helps crews verify readiness and compliance before work begins. It covers job briefings, site clearance, confined space controls, hot work permitting, scaffolding and aerial lift inspections, housekeeping, fire prevention, hand and power tool safety, ladders and fall protection, PPE, forklifts, flammable gas and liquid storage, welding and cutting safeguards, trenching requirements, and final sign-off. Use it to standardize inspections, reduce hazards, and document corrective actions.
by Bill McDowell, from the Community
Downloads: 0
Get
Template
AT Mechanical Safety Audit
This AT Mechanical safety audit checklist supports comprehensive construction site inspections. It covers administration and training records, confined spaces, cranes and hoisting, electrical safety and lockout/tagout, environmental controls, excavations, fall protection, fire prevention, hand and power tools, hazard communication, housekeeping, ladders and stairs, medical and emergency readiness, motorized equipment, PPE compliance, scaffolding, aerial lifts, and welding and cutting. Use it to verify documentation, equipment condition, worker competence, and site controls to reduce risk and improve compliance.
by Eric Zabinski, from the Community
Downloads: 10+
Get
Template
Management Safety Audit Checklist
This management safety audit checklist helps supervisors evaluate site safety and compliance on construction projects. It covers administrative controls, housekeeping, fire prevention, PPE and respiratory protection, abrasive blasting, fall protection, hand and power tools, electrical safety and lockout procedures, vehicles and powered industrial trucks, HAZCOM and spill preparedness, ladders, scaffolding setup and tagging, confined space permits and monitoring, hazardous material operations and decontamination, welding and cutting with hot work permits, and hoisting and rigging practices. It concludes with space for comments, corrective actions, and sign-offs by the inspector and site supervisor.
by Nasser Rodriguez, from the Community
Downloads: 0
Get

Electrician Contractors Safety Checklist

Standardize electrical contracting site safety with this comprehensive checklist. Use it to document daily job briefings, verify clearances and lockout, review confined space permits and air monitoring, control hot work, and inspect welding and cutting setups. Confirm fire prevention measures, housekeeping, and PPE including arc flash protection. Check aerial lifts and fall protection, evaluate hand and power tools with GFCI and inspection dates, and verify ladder condition and use. Ideal for supervisors and crews to improve compliance and reduce risk.

by Bob Weis, from the Community

Get

Template

Pipe Fitters Contractor Safety Checklist

This pipe fitters contractor safety checklist helps crews verify readiness and compliance before work begins. It covers job briefings, site clearance, confined space controls, hot work permitting, scaffolding and aerial lift inspections, housekeeping, fire prevention, hand and power tool safety, ladders and fall protection, PPE, forklifts, flammable gas and liquid storage, welding and cutting safeguards, trenching requirements, and final sign-off. Use it to standardize inspections, reduce hazards, and document corrective actions.

by Bill McDowell, from the Community

Get

Template

AT Mechanical Safety Audit

This AT Mechanical safety audit checklist supports comprehensive construction site inspections. It covers administration and training records, confined spaces, cranes and hoisting, electrical safety and lockout/tagout, environmental controls, excavations, fall protection, fire prevention, hand and power tools, hazard communication, housekeeping, ladders and stairs, medical and emergency readiness, motorized equipment, PPE compliance, scaffolding, aerial lifts, and welding and cutting. Use it to verify documentation, equipment condition, worker competence, and site controls to reduce risk and improve compliance.

by Eric Zabinski, from the Community

10+

Get

Template

Management Safety Audit Checklist

This management safety audit checklist helps supervisors evaluate site safety and compliance on construction projects. It covers administrative controls, housekeeping, fire prevention, PPE and respiratory protection, abrasive blasting, fall protection, hand and power tools, electrical safety and lockout procedures, vehicles and powered industrial trucks, HAZCOM and spill preparedness, ladders, scaffolding setup and tagging, confined space permits and monitoring, hazardous material operations and decontamination, welding and cutting with hot work permits, and hoisting and rigging practices. It concludes with space for comments, corrective actions, and sign-offs by the inspector and site supervisor.

by Nasser Rodriguez, from the Community

Get

Iron Worker Contractor Safety Checklist

About author

You might also like

Electrician Contractors Safety Checklist

Pipe Fitters Contractor Safety Checklist

AT Mechanical Safety Audit

Management Safety Audit Checklist

You might also like

Electrician Contractors Safety Checklist

Pipe Fitters Contractor Safety Checklist

AT Mechanical Safety Audit

Management Safety Audit Checklist