Template

HSQE Audit for Demolition Projects

by Dan Mitrica, from the Community

This HSQE audit checklist is designed for demolition works. It guides auditors through site setup, security, welfare, first aid and fire procedures; staff induction and RAMS verification; environmental controls including storage of hazardous materials, spill response and waste segregation; and core safety checks covering electrical safety, PPE and RPE, PUWER, HAVS, and COSHH. It includes specialist procedures for scaffolding and work at height, temporary works, LOLER lifting, vehicle–pedestrian segregation, asbestos, services isolation, excavations and confined spaces. The template also supports operative-level audits, documentation reviews and closeout actions.

With SafetyCulture you can

Digitize team workflows

Turn your workflows into digital templates or checklists so your team can conduct inspections efficiently and access them from any device.

Reduce manual errors

Help your team complete tasks more accurately with digital templates that minimize errors from manual processes.

Create and share inspection reports

Generate inspection reports and share them with your team and stakeholders to keep everyone informed.

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
HSQE Audit Fire Stopping Checklist
This HSQE audit template focuses on fire stopping and general construction site compliance. Use it to review site setup and security, welfare and first aid, fire procedures and equipment, inductions and site rules, RAMS and manual handling, housekeeping and access, storage of hazardous materials, spill response and waste management. Verify electrical safety, PPE and RPE, tool and plant use, vibration exposure, and CoSHH. Check scaffolds and other work at height equipment, temporary works, lifting operations under LOLER, traffic and pedestrian segregation, demolition, excavations and confined space, asbestos controls, and services isolation. Include an operative audit to confirm inductions, qualifications, method statement and risk assessment briefings, toolbox talks, and use of latest documents before capturing signatures.
by Marian Pavaloaie, from the Community
Downloads: 0
Get
Template
PFM C21 HSQE Internal Audit Checklist
Use this HSQE internal audit checklist to review construction site compliance against statutory, legislative and ISO standards. Sections cover HSQE management documentation, RAMS and communication, excavations, work at height, LOLER, temporary works, confined spaces, PUWER, electricity and services, site access and vehicle management, gases and PPE. It also audits environmental procedures and controls, subcontractor management, security and signage, housekeeping, COSHH, welfare, fire and emergency, first aid, training, manual handling and close-out.
by David Hallett, from the Community
Downloads: 10+
Get
Template
ACS Mids HSQE Internal Audit
Perform a thorough HSQE internal audit for construction sites with this ready to use checklist. Evaluate site management and documentation, RAMS and communication, excavations, work at height, lifting operations under LOLER, temporary works, confined spaces, plant and equipment, electricity and services, site access and vehicle management, gases, PPE, and environmental procedures and controls. Review supplier and subcontractor control, security and signage, housekeeping and waste, COSHH and health hazards, welfare facilities, fire and emergency readiness, first aid and RIDDOR, training and competence, and manual handling. Designed to support statutory and ISO requirements and to close out previous non conformances.
by Chris Bowes, from the Community
Downloads: 0
Get
Template
Contractor Compliance Inspection Checklist
This contractor compliance inspection template helps verify that suppliers and contractors meet site safety and legal requirements on construction projects. It covers welfare facilities, site documentation such as RAMS and COSHH, inductions and training records, permits to work including hot works, isolation and electrical, work at height controls, scaffolding and MEWPs, PPE and RPE fit testing, excavations and CAT and Genny scans, confined space entry and rescue, lifting operations and LOLER, traffic and pedestrian management, access and egress, fire safety and first aid, and environmental controls including waste and spill response.
by Paul Turpin, from the Community
Downloads: 0
Get

HSQE Audit for Demolition Projects

With SafetyCulture you can

Digitize team workflows

Reduce manual errors

Create and share inspection reports

About author

You might also like

HSQE Audit Fire Stopping Checklist

PFM C21 HSQE Internal Audit Checklist

ACS Mids HSQE Internal Audit

Contractor Compliance Inspection Checklist

You might also like

HSQE Audit Fire Stopping Checklist

PFM C21 HSQE Internal Audit Checklist

ACS Mids HSQE Internal Audit

Contractor Compliance Inspection Checklist