Template

Glenevin HSE Site Inspection Checklist

by Robbie Graham, from the Community

This HSE site inspection checklist helps construction and utilities crews verify compliance and site safety. It covers documentation readiness (RAMS, training records, onboarding, emergency procedures), vehicle checks (pre-use inspections, equipment, extinguishers, first aid), and site setup including traffic management, signage, barriers, courtesy boards, sandbags, cones, plates, access and egress, housekeeping, pedestrian routes, and public safety. It also audits excavations (service locating, trial holes, Cat & Genny use, safe digging), PPE compliance, tools and plant condition, HAVS assessments, user qualifications, and operative behavior. Environmental controls include spill prevention, kits, tree protection zones, and noise assessments. COSHH storage and assessments are included. Final section captures HSE and Supervisor sign-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Site Compliance Audit Checklist
Use this site compliance audit checklist to assess civil and fiber works sites. Verify on-site risk assessments, pre-start checks, gang and COSHH packs, current utility drawings, and service identification and trial holes. Confirm worker qualifications, Cat and Genny condition, vehicle safety, spill kits, first aid, and correct PPE. Review signage, permit boards, cones, barriers, walkways, ramps, and resident access. Check traffic management setup, housekeeping, dust suppression, and protection of drains. Conclude with findings and capture signatures and date.
by Tracy Peart, from the Community
Downloads: 10+
Get
Template
HSE Audit Template for Construction Sites
This construction HSE audit template helps teams assess and document site safety across all critical areas. It guides audits of HSE documentation and permits, inductions, toolbox talks, and risk assessments. It covers PPE compliance, tool and equipment checks, plant and vehicle condition and authorization, and welfare and site compound standards. Key work activities addressed include work at height, excavations, lifting operations, and manual handling. The template also reviews fire safety and first aid readiness, occupational health risks such as noise, dust, vibration, and asbestos, environmental controls for waste, drainage, and chemical storage, and electrical safety including RAMS, inspections, signage, and lockout tagout.
by Michael Fraschini, from the Community
Downloads: 10+
Get
Template
HSE Site Inspection Report Kiln Bridge
Conduct comprehensive health, safety, and environmental inspections on construction sites with this structured report template. Review critical areas including work at height, edge protection, scaffolds and work platforms, ladders and podium steps, MEWPs, excavations and ground works, housekeeping and trip hazards, plant and traffic management, temporary works, plant and equipment, access, egress, and signage, PPE including fall arrest equipment, welfare facilities, electrical hand tools and leads, air lines, fire precautions, first aid resources, COSHH, noise and vibration, daily site HSE inspections, LOLER and PUWER records, HSE consultation, toolbox talks records, risk assessments, environmental management, method statements, induction records, the HSE plan, close out of previous issues, and office, site, and stores setup. Capture general comments and observations and complete sign off to close the inspection.
by SafetyCulture
Downloads: 100+
Get
Template
Construction HSE Inspection Checklist
This construction HSE inspection checklist helps site managers and HSE officers assess compliance and risk across critical areas. Sections cover site signage, documentation and RAMS, competencies and training, welfare, access and egress, housekeeping, fire safety, waste management, PPE and COSHH, traffic management, tools and electrics, work at height, scaffolding, confined spaces, noise and vibration, silica dust, asbestos controls, safety netting, first aid, plant and lifting operations, manual handling, security, compressed gases, temporary works, excavations, site management, permits, heat stress and exclusion zones. Customize to fit your project.
by mushfiq mushtaq, from the Community
Downloads: 0
Get

Glenevin HSE Site Inspection Checklist

About author

You might also like

Site Compliance Audit Checklist

HSE Audit Template for Construction Sites

HSE Site Inspection Report Kiln Bridge

Construction HSE Inspection Checklist

You might also like

Site Compliance Audit Checklist

HSE Audit Template for Construction Sites

HSE Site Inspection Report Kiln Bridge

Construction HSE Inspection Checklist