Template

FW Civils Plant and Safety Equipment Check

by Daryl Martin, from the Community

Use this FW Civils checklist to audit plant and safety equipment on construction sites. Assess hand tools condition, inspect and tag hydraulic packs and breakers, compaction plates, and verify CAT and Genny and GDU calibration. Ensure Chapter 8 barriers and signage are in place, first aid and eyewash are in date, fire extinguishers are tested, and PPE is available. Confirm crew IDs and capture sign off to document compliance and readiness.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Civils Site Audit Sheet
This civils site audit sheet helps civil engineering and street works teams verify that job packs, site plans, and RAMS are in place. Inspect signage, lighting and guarding, traffic management plans, public safety, and PPE. Check tools and equipment for defects and calibration, confirm insulated tools and safe storage, and review vehicle parking and checks. Verify safety equipment including first aid kits, fire extinguishers, cable avoidance tools, spill kits, and hygiene. Conduct PPE spot checks and confirm accreditations such as NERS passports and task cards. Use notes to record issues and corrective actions.
by Amylee Tiley, from the Community
Downloads: 20+
Get
Template
Civils Audit Checklist
Assess civil engineering and construction site safety with a comprehensive Civils Audit checklist. Verify RAMS, COSHH, permits, and qualifications; check LOLER and PUWER inspections, plant and lifting certifications, and daily pre-use checks. Review welfare and housekeeping, segregation, excavations, dust and noise control, PPE, and environmental protections. Ensure toolbox talks, POWRA, emergency plans, and first aid and fire arrangements are in place and recorded.
by Stephen Pearce, from the Community
Downloads: 0
Get
Template
Manager Audit - Civils
This civil engineering manager audit template helps supervisors assess street works and excavation sites on every visit. It covers site setup and layout, NRSWA compliance, pit safety and working at height, vehicle legality and condition, cab and rear cleanliness, PPE availability and condition, calibrated gas monitoring, tools and plant checks (quick cut saw, whacker plate, breaker, slab lifter, CAT and genny), Chapter 8 signage and guarding, fire extinguisher and first aid kits, personnel appearance, risk assessments, and documentation including job packs, STATS drawings, amenities, and emergency numbers. Capture photos and sign off.
by SML Office, from the Community
Downloads: 0
Get
Template
Site Safety Compliance Inspection
This site safety compliance inspection checklist helps teams assess critical controls and standards on construction and civil works sites. Verify documentation and daily risk assessments, COSHH records, PPE, and the condition of tools and plant. Review signing, lighting and guarding, barriers, and pedestrian safety. Check safe digging practices (CAT and Genny, HSG47), underground service markings, and confined space gas detection. Confirm first aid and eyewash status, fire extinguishers, and environmental spill response. Evaluate manual handling, cable pulling safety, and HAUC reinstatement quality. Use this template to benchmark compliance and identify corrective actions.
by Haydn Davies, from the Community
Downloads: 0
Get

Civils Site Audit Sheet

This civils site audit sheet helps civil engineering and street works teams verify that job packs, site plans, and RAMS are in place. Inspect signage, lighting and guarding, traffic management plans, public safety, and PPE. Check tools and equipment for defects and calibration, confirm insulated tools and safe storage, and review vehicle parking and checks. Verify safety equipment including first aid kits, fire extinguishers, cable avoidance tools, spill kits, and hygiene. Conduct PPE spot checks and confirm accreditations such as NERS passports and task cards. Use notes to record issues and corrective actions.

by Amylee Tiley, from the Community

20+

Get

Template

Civils Audit Checklist

Assess civil engineering and construction site safety with a comprehensive Civils Audit checklist. Verify RAMS, COSHH, permits, and qualifications; check LOLER and PUWER inspections, plant and lifting certifications, and daily pre-use checks. Review welfare and housekeeping, segregation, excavations, dust and noise control, PPE, and environmental protections. Ensure toolbox talks, POWRA, emergency plans, and first aid and fire arrangements are in place and recorded.

by Stephen Pearce, from the Community

Get

Template

Manager Audit - Civils

This civil engineering manager audit template helps supervisors assess street works and excavation sites on every visit. It covers site setup and layout, NRSWA compliance, pit safety and working at height, vehicle legality and condition, cab and rear cleanliness, PPE availability and condition, calibrated gas monitoring, tools and plant checks (quick cut saw, whacker plate, breaker, slab lifter, CAT and genny), Chapter 8 signage and guarding, fire extinguisher and first aid kits, personnel appearance, risk assessments, and documentation including job packs, STATS drawings, amenities, and emergency numbers. Capture photos and sign off.

by SML Office, from the Community

Get

Template

Site Safety Compliance Inspection

This site safety compliance inspection checklist helps teams assess critical controls and standards on construction and civil works sites. Verify documentation and daily risk assessments, COSHH records, PPE, and the condition of tools and plant. Review signing, lighting and guarding, barriers, and pedestrian safety. Check safe digging practices (CAT and Genny, HSG47), underground service markings, and confined space gas detection. Confirm first aid and eyewash status, fire extinguishers, and environmental spill response. Evaluate manual handling, cable pulling safety, and HAUC reinstatement quality. Use this template to benchmark compliance and identify corrective actions.

by Haydn Davies, from the Community

Get

FW Civils Plant and Safety Equipment Check

About author

You might also like

Civils Site Audit Sheet

Civils Audit Checklist

Manager Audit - Civils

Site Safety Compliance Inspection

You might also like

Civils Site Audit Sheet

Civils Audit Checklist

Manager Audit - Civils

Site Safety Compliance Inspection