Template

Electrical Tools and Equipment Task Inspection

by Cassandra Cook, from the Community

30+

Use this Electrical Tools and Equipment Task Inspection checklist to verify training, SWMS sign on, PPE, RCD use, and the condition of tools and leads. Check guards, handles, and correct discs, ensure leads are elevated, avoid double adapters, and store equipment safely. Record issues, assign corrective actions with responsible person and due dates, and capture signatures. Improve electrical safety compliance and reduce risk on construction sites.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Angle Grinder Operations Task Inspection
Use this angle grinder task inspection checklist to verify safe setup and operation on site. Confirm SWMS sign-on, PPE, quarterly tagging, and RCDs. Inspect tool condition, guards and handles, correct discs for the job, and safe electrical leads. Ensure leads are elevated, no double adapters are used, and tools are stored correctly when not in use. Remind crews to keep loose clothing, jewelry, hair, and beards clear of rotating parts. Record corrective actions with who and when to drive accountability.
by Cassandra Cook, from the Community
Downloads: 10+
Get
Template
Stevens Electrical Construction Safety Checklist
This electrical construction safety checklist helps teams confirm site readiness and compliance across key areas: housekeeping and lighting, electrical safety (lockout/tagout, GFCI, guarded panels, arc flash labels), PPE use, ladders and elevated work, tools and equipment condition, documentation and emergency preparedness, and trenching and excavation controls. Use it to standardize inspections, identify hazards early, and support corrective actions that reduce risk and improve safety performance on electrical construction projects.
by Randall Cofer, from the Community
Downloads: 0
Get
Template
RVA Group Electrical Tools Audit
Use this RVA Group electrical tools audit to verify compliance and safety across worksites. The checklist covers PAT testing intervals and labeling, maintenance records, registration and condition of tools and extension leads, presence of protective guards, voltage requirements including 110V tools and lower limits for wet conditions, correct storage when not in use, and procedures to tag out and remove defective equipment. Capture actions and signatures from the auditor and site supervisor.
by Kevin Burnett, from the Community
Downloads: 10+
Get
Template
Workshop Safety Inspection Checklist
Use this workshop safety inspection checklist to evaluate conditions in construction workshops, including office and ablution areas, lighting and ventilation, machine guarding, electrical equipment and tagging, PPE, housekeeping, walkways and emergency exits. Verify fire extinguishers and signage, gas bottle storage, battery charging stations, spill kits and absorbents, waste segregation and oil management. Assess storage of hoses, leads and tools, grinder discs and welding gear, and ensure emergency showers and eyewash stations are accessible and working. Capture findings, assign actions, and maintain compliance and safety standards.
by Henno Ferreira, from the Community
Downloads: 10+
Get

Angle Grinder Operations Task Inspection

Use this angle grinder task inspection checklist to verify safe setup and operation on site. Confirm SWMS sign-on, PPE, quarterly tagging, and RCDs. Inspect tool condition, guards and handles, correct discs for the job, and safe electrical leads. Ensure leads are elevated, no double adapters are used, and tools are stored correctly when not in use. Remind crews to keep loose clothing, jewelry, hair, and beards clear of rotating parts. Record corrective actions with who and when to drive accountability.

by Cassandra Cook, from the Community

10+

Get

Template

Stevens Electrical Construction Safety Checklist

This electrical construction safety checklist helps teams confirm site readiness and compliance across key areas: housekeeping and lighting, electrical safety (lockout/tagout, GFCI, guarded panels, arc flash labels), PPE use, ladders and elevated work, tools and equipment condition, documentation and emergency preparedness, and trenching and excavation controls. Use it to standardize inspections, identify hazards early, and support corrective actions that reduce risk and improve safety performance on electrical construction projects.

by Randall Cofer, from the Community

Get

Template

RVA Group Electrical Tools Audit

Use this RVA Group electrical tools audit to verify compliance and safety across worksites. The checklist covers PAT testing intervals and labeling, maintenance records, registration and condition of tools and extension leads, presence of protective guards, voltage requirements including 110V tools and lower limits for wet conditions, correct storage when not in use, and procedures to tag out and remove defective equipment. Capture actions and signatures from the auditor and site supervisor.

by Kevin Burnett, from the Community

10+

Get

Template

Workshop Safety Inspection Checklist

Use this workshop safety inspection checklist to evaluate conditions in construction workshops, including office and ablution areas, lighting and ventilation, machine guarding, electrical equipment and tagging, PPE, housekeeping, walkways and emergency exits. Verify fire extinguishers and signage, gas bottle storage, battery charging stations, spill kits and absorbents, waste segregation and oil management. Assess storage of hoses, leads and tools, grinder discs and welding gear, and ensure emergency showers and eyewash stations are accessible and working. Capture findings, assign actions, and maintain compliance and safety standards.

by Henno Ferreira, from the Community

10+

Get

Electrical Tools and Equipment Task Inspection

About author

You might also like

Angle Grinder Operations Task Inspection

Stevens Electrical Construction Safety Checklist

RVA Group Electrical Tools Audit

Workshop Safety Inspection Checklist

You might also like

Angle Grinder Operations Task Inspection

Stevens Electrical Construction Safety Checklist

RVA Group Electrical Tools Audit

Workshop Safety Inspection Checklist