Template

Electrical Safety Check Checklist

by guoti pang, from the Community

10+

Use this electrical safety inspection checklist to assess domestic, commercial and industrial installations. Sections cover consumer mains, switchboards, wiring systems, electrical equipment, earthing and smoke alarms. Verify RCDs, isolation and protection devices, labeling, segregation, clearances and IP ratings. Includes exit checks and sign off, with notes that approximately 10 percent of the installation is sampled and cabling within building fabric is not inspected. Aligns with AS NZS 3000 and related standards.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Electrical Safety Check
Use this Electrical Safety Check to evaluate the condition and compliance of electrical installations across domestic, commercial, and industrial sites. The checklist covers consumer mains, switchboards (location, MEN connection, labeling, isolation, RCDs, over-current and arc-fault protection), wiring systems (capacity, identification, support, segregation, overhead clearances), electrical equipment (installation, IP rating, guarding), and earthing and bonding. Includes exit checks and sign off, aligned to AS/NZS 3000 guidance; intended as a sample inspection and does not assess concealed cabling.
by Gary McLennan, from the Community
Downloads: 30+
Get
Template
Electrical Inspection Report Template
Use this electrical inspection report template to evaluate the safety and compliance of electrical installations. Sections cover site information, installation type and age, consumer mains, switchboards, wiring systems, equipment, and grounding. Includes checks for protection devices, labeling, isolation, cable identification and terminations, overhead clearances, protection from external influences, and equipotential bonding. Exit checks and sign off steps are provided. Designed for domestic, commercial, and industrial sites and aligned with AS NZS requirements.
by Micah Richards, from the Community
Downloads: 20+
Get
Template
TSANT Electrical Compliance Inspection Audit
Audit electrical installations for compliance and safety using this TSANT checklist. It covers fundamental principles, control and protection of switchgear and switchboards, selection and installation of wiring systems, appliances and accessories, and earthing arrangements. It includes requirements for damp locations, recessed luminaires, PV array equipment ratings, and mandatory verification tests such as RCD operation. Based on AS NZS 3000 and AS NZS 5033, this template helps verify labeling, terminations, segregation, and protection measures across residential and commercial sites.
by Mario Varone, from the Community
Downloads: 10+
Get
Template
Home Electrical Safety Inspection Checklist
Use this home electrical safety inspection checklist to assess the main switchboard, phases, sub-boards, surge protection, and RCDs. Verify consumer mains sizing, hardwired and interconnected smoke alarms, and the condition of fittings, switches, and outdoor lights with appropriate IP ratings. Capture photos, notes, and evidence for each item to document findings and actions. Ideal for residential inspections and routine safety checks.
by Tyron Thompson, from the Community
Downloads: 0
Get

Electrical Safety Check

Use this Electrical Safety Check to evaluate the condition and compliance of electrical installations across domestic, commercial, and industrial sites. The checklist covers consumer mains, switchboards (location, MEN connection, labeling, isolation, RCDs, over-current and arc-fault protection), wiring systems (capacity, identification, support, segregation, overhead clearances), electrical equipment (installation, IP rating, guarding), and earthing and bonding. Includes exit checks and sign off, aligned to AS/NZS 3000 guidance; intended as a sample inspection and does not assess concealed cabling.

by Gary McLennan, from the Community

30+

Get

Template

Electrical Inspection Report Template

Use this electrical inspection report template to evaluate the safety and compliance of electrical installations. Sections cover site information, installation type and age, consumer mains, switchboards, wiring systems, equipment, and grounding. Includes checks for protection devices, labeling, isolation, cable identification and terminations, overhead clearances, protection from external influences, and equipotential bonding. Exit checks and sign off steps are provided. Designed for domestic, commercial, and industrial sites and aligned with AS NZS requirements.

by Micah Richards, from the Community

20+

Get

Template

TSANT Electrical Compliance Inspection Audit

Audit electrical installations for compliance and safety using this TSANT checklist. It covers fundamental principles, control and protection of switchgear and switchboards, selection and installation of wiring systems, appliances and accessories, and earthing arrangements. It includes requirements for damp locations, recessed luminaires, PV array equipment ratings, and mandatory verification tests such as RCD operation. Based on AS NZS 3000 and AS NZS 5033, this template helps verify labeling, terminations, segregation, and protection measures across residential and commercial sites.

by Mario Varone, from the Community

10+

Get

Template

Home Electrical Safety Inspection Checklist

Use this home electrical safety inspection checklist to assess the main switchboard, phases, sub-boards, surge protection, and RCDs. Verify consumer mains sizing, hardwired and interconnected smoke alarms, and the condition of fittings, switches, and outdoor lights with appropriate IP ratings. Capture photos, notes, and evidence for each item to document findings and actions. Ideal for residential inspections and routine safety checks.

by Tyron Thompson, from the Community

Get

Electrical Safety Check Checklist

About author

You might also like

Electrical Safety Check

Electrical Inspection Report Template

TSANT Electrical Compliance Inspection Audit

Home Electrical Safety Inspection Checklist

You might also like

Electrical Safety Check

Electrical Inspection Report Template

TSANT Electrical Compliance Inspection Audit

Home Electrical Safety Inspection Checklist