Template

D2C Safe Work Procedure v1.9

by Parminder Singh, from the Community

20+

Use this Division 2 Contracting safe work procedure template to plan and document construction tasks safely. Identify hazards such as working at heights, falling debris, energized equipment, open excavations, and traffic in work areas. Record preventative actions, required PPE, and equipment onsite. Include toolbox meetings, control measures, permits, and fall protection plans. Add media and drawings, and capture worker and supervisor signatures to confirm daily reviews and approvals.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Work Safely at Heights Checklist
This work safely at heights checklist helps teams identify and control risks before starting tasks at elevation. Assess worker readiness, PPE, and fall protection; isolate power sources including grid, solar, generator, and batteries; evaluate weather conditions such as rain, wind, heat, cold, and lightning; and review roof height, angle, material, and condition. Inspect access points, ladders, scaffolds, and surrounding hazards, document controls, attach photos and diagrams, and record permits and rescue plans. Use this template to standardize working at heights safety across sites.
by David Muston, from the Community
Downloads: 20+
Get
Template
Contracting Division Jobsite Safety Inspection
This contracting division jobsite safety inspection checklist helps supervisors assess compliance and safety on construction sites. It covers job setup, housekeeping, PPE, environmental controls, vehicle and equipment condition, tool safety, fall protection, ladders, fire safety, traffic control, cutting and welding, rigging, and crane operations. Use it to verify training, proper setup, and daily inspections, identify hazards, and document corrective actions.
by Scott Purdy, from the Community
Downloads: 0
Get
Template
Site Safety Observation Record
Use this site safety observation record to conduct quick on site checks and document hazards, controls, and actions. The checklist covers work environment and conditions such as housekeeping, fall prevention, traffic control, and environmental measures. It verifies systems and procedures including SWMS and permits. It prompts reviews of people and behavior, actions such as lifting and working at height, and protection like PPE and electrical and chemical safety. It also assesses tools, equipment, vehicles, and communication, and helps assign and track corrective actions.
by Peter Hughes, from the Community
Downloads: 10+
Get
Template
D2C Jobsite Safety Audit Checklist v1.2
This D2C Jobsite Safety Audit v1.2 checklist helps safety coordinators and qualified site inspectors review critical construction hazards and controls. Sections cover fall protection, heavy equipment, tools and guards, scaffolds and ladders, manual handling, hazardous chemicals and storage, emergency response, traffic management, PPE, housekeeping and lighting, electrical power and lockout, underground and overhead services, environmental controls, and administrative procedures. Capture photos, note deficiencies, assign corrective actions, and sign off to maintain a safer jobsite.
by Trevor Walper, from the Community
Downloads: 10+
Get

Work Safely at Heights Checklist

This work safely at heights checklist helps teams identify and control risks before starting tasks at elevation. Assess worker readiness, PPE, and fall protection; isolate power sources including grid, solar, generator, and batteries; evaluate weather conditions such as rain, wind, heat, cold, and lightning; and review roof height, angle, material, and condition. Inspect access points, ladders, scaffolds, and surrounding hazards, document controls, attach photos and diagrams, and record permits and rescue plans. Use this template to standardize working at heights safety across sites.

by David Muston, from the Community

20+

Get

Template

Contracting Division Jobsite Safety Inspection

This contracting division jobsite safety inspection checklist helps supervisors assess compliance and safety on construction sites. It covers job setup, housekeeping, PPE, environmental controls, vehicle and equipment condition, tool safety, fall protection, ladders, fire safety, traffic control, cutting and welding, rigging, and crane operations. Use it to verify training, proper setup, and daily inspections, identify hazards, and document corrective actions.

by Scott Purdy, from the Community

Get

Template

Site Safety Observation Record

Use this site safety observation record to conduct quick on site checks and document hazards, controls, and actions. The checklist covers work environment and conditions such as housekeeping, fall prevention, traffic control, and environmental measures. It verifies systems and procedures including SWMS and permits. It prompts reviews of people and behavior, actions such as lifting and working at height, and protection like PPE and electrical and chemical safety. It also assesses tools, equipment, vehicles, and communication, and helps assign and track corrective actions.

by Peter Hughes, from the Community

10+

Get

Template

D2C Jobsite Safety Audit Checklist v1.2

This D2C Jobsite Safety Audit v1.2 checklist helps safety coordinators and qualified site inspectors review critical construction hazards and controls. Sections cover fall protection, heavy equipment, tools and guards, scaffolds and ladders, manual handling, hazardous chemicals and storage, emergency response, traffic management, PPE, housekeeping and lighting, electrical power and lockout, underground and overhead services, environmental controls, and administrative procedures. Capture photos, note deficiencies, assign corrective actions, and sign off to maintain a safer jobsite.

by Trevor Walper, from the Community

10+

Get

D2C Safe Work Procedure v1.9

About author

You might also like

Work Safely at Heights Checklist

Contracting Division Jobsite Safety Inspection

Site Safety Observation Record

D2C Jobsite Safety Audit Checklist v1.2

You might also like

Work Safely at Heights Checklist

Contracting Division Jobsite Safety Inspection

Site Safety Observation Record

D2C Jobsite Safety Audit Checklist v1.2