Template

Civils Risk Assessment / Evaluarea riscurilor civile

by SML Office, from the Community

This bilingual (EN/RO) civils risk assessment template helps construction teams plan safe fibre duct and reinstatement works. It guides users to identify hazards such as underground services, hot works, confined spaces, noise and vibration, and hazardous substances; select appropriate PPE; verify permits; test chambers for gas; mark services using CAT and Genny; set correct signage; and follow method statements for drilling and reinstatement. Includes pre-start checks, welfare arrangements, plant and equipment lists, continuous risk review, incident reporting, photo evidence of site setup and gas detector status, and end-of-job sign-off by all operatives.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Civils Risk Assessment and Method Statement RAMS
Use this civil engineering risk assessment and method statement template to plan and control street works and duct repairs for fibre installations. It covers scope of works, affected persons, hazard identification and controls, PPE specifications, plant and equipment, permits, underground service locating with CAT and Genny, gas monitoring in chambers, traffic management to Chapter 8 and the Red Book, dust control, diamond drilling competence, documentation, and sign off. The sequence guides pre start checks, toolbox briefings, ongoing risk review, and site reinstatement. Capture photos for pre site set up and gas detector status, record COSHH details, and log emergency arrangements and first aid information.
by SML Office, from the Community
Downloads: 10+
Get
Template
Point of Work Risk Assessment for Civils
Use this point of work risk assessment for civils to plan and document safe methods before excavation and trenching. The template helps teams identify hazards such as slips, trips, falls, working near highways, overhead and buried services, dust, vibration, noise, manual handling, mechanical lifting, and confined spaces. Record CAT and Genny checks, permits to dig, traffic management and signage, PPE, and environmental controls including COSHH, spill prevention, and protection of trees, hedgerows, and waterways. Capture site setup, roles, agreed controls, and sign-off to ensure every crew understands the safe system of work.
by Gillian Huppler, from the Community
Downloads: 0
Get
Template
Construction Works in Progress Report Template
This Works in Progress Report template helps construction and civils teams document on-site activities and compliance. It covers Chapter 8 NRSWA traffic management, site setup, and signage; equipment checks for CAT, GENNY, GDU, first aid, eye wash, water test kit, and fire extinguisher; job pack verification with gas, water, electric, CATV, and fibre prints; and completion of a point of work risk assessment. It includes vehicle housekeeping, duct and fibre installation details (depth, roping, chamber entry), frame and cover security, cabinet installation and resin application, and reinstatement quality. The template supports photo evidence, customer acceptance, and supervisor sign-off to ensure quality, safety, and compliance.
by Mike Ritchie, from the Community
Downloads: 0
Get
Template
PIB Risk Management HSE Site Visit
Conduct comprehensive HSE site visits with this construction checklist designed for site managers and safety teams. Assess access and egress, housekeeping, material storage, security, traffic and pedestrian management, environmental controls, lighting, overhead and underground services, plant and equipment, manual handling, noise and vibration, fire and emergency procedures, excavations, working at height and scaffolding, confined spaces, lifting operations, highway works, portable electrical equipment, hazardous substances, welfare arrangements, first aid and incident reporting, signage, risk assessments and method statements, inductions, PPE and RPE, permits to work, training and toolbox talks, and temporary works. Capture notes, photos, and corrective actions to drive compliance and safer sites.
by Jamie Douglas, from the Community
Downloads: 0
Get

Civils Risk Assessment / Evaluarea riscurilor civile

About author

You might also like

Civils Risk Assessment and Method Statement RAMS

Point of Work Risk Assessment for Civils

Construction Works in Progress Report Template

PIB Risk Management HSE Site Visit

You might also like

Civils Risk Assessment and Method Statement RAMS

Point of Work Risk Assessment for Civils

Construction Works in Progress Report Template

PIB Risk Management HSE Site Visit