Template

Cembrit Cladding Panel Checklist

Use this practical checklist to inspect Cembrit cladding installations. Verify omega rails and Z-bars, fixing patterns, rivets, joint sizes, and blackout foil tape per A2O and manufacturer guidance. Check Tenmat fire barriers and bracket spacing, record findings with photos and notes, create corrective actions, assign owners and due dates, and capture digital signatures from installer, contractor, and client for completion.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

A2O Cladding Quality Assurance Checklist

Use this A2O basic cladding quality assurance checklist to verify sample panel installation on site. Inspect SFS opening sizes and stud spacing, confirm correct fixings and board gaps, and check cladding rail installation including L and T rails, helping hand brackets, and Mechslip horizontals. Validate brick slips alignment, perp joint spacing, mortar mixing and tooling, and GRC panel delivery and installation with correct clearances and sealants. Add photos, notes, and corrective actions, capture hold point sign-offs, and complete with digital signatures from installer, A2O, and client.

by William Carter, from the Community

Get

Template

Horizontal Fire Barrier at Roof Level Cavity

This quality assurance checklist helps installers and inspectors verify horizontal fire barriers at roof level cavities. Use it to record project details, confirm correct positioning of barriers, check siderise bracket spacing and folds, validate the 25 mm ventilation gap between barrier and cladding, and ensure silver foil tape is applied across joints and abutments. Capture photos, notes, and corrective actions, and complete sign-off with digital signatures from installer, A2O, and client. Designed as a practical guide for fire protection and cladding works.

by Martin Coupe, from the Community

Get

Template

Cladding Handover Checklist

This cladding handover checklist helps construction teams verify the quality and completeness of exterior cladding before practical completion. Cover key items such as Tyvek installation, bracket and rail fixing, fire barrier placement, insulation, panel alignment and finish, and sealant checks. Record issues with notes and photos, document client and site details, and capture sign-off to confirm compliance. Use it to standardize inspections, reduce defects, and ensure a clean, professional handover.

by Corneliu Calimanescu, from the Community

10+

Get

Template

A2O Vertical Tenmat Fire Barrier QA Checklist

This construction quality assurance checklist guides installers through verifying vertical Tenmat fire barrier installation on cladding projects. It covers pre installation meetings and training, confirming materials against the A2O schedule, ensuring brackets and non combustible fixings are at correct centers, allowing the required compression allowance, sealing joints, and arranging Tenmat inspections prior to cladding. The template supports notes, photos, corrective actions, and digital signatures for installer, contractor, and client, with easy export for reporting.

by Roman Fedenko, from the Community

Get

Template

Timber Cladding Quality Assurance Checklist

Use this A2O Timber Cladding Quality Assurance checklist to verify correct materials, fixings, and alignment prior to sign-off. Record site details (main contractor, project number, elevation, level), mark items as Checked or Hold, add photos and notes, and create corrective actions with owners, priorities, and due dates. Capture installer, A2O, and client signatures to complete the audit, then export your report as PDF, Word, Excel, or web link.

by Roman Fedenko, from the Community

Get

Template

A2O Corium Cladding QA Checklist

This A2O Corium cladding quality assurance checklist helps site teams verify every stage of a cladding install. It covers Tyvek Firecurb membrane selection and taping, support grid bracket spacing and fixings, positive fixing of vertical T and L rails, movement via slotted holes, and Rocksilk insulation placement with tight joints. It guides checks on horizontal support trays, correct fixings, brick clipping, damaged or misshaped bricks, and consistent vertical coursing. The template supports adding photos, notes, and corrective actions, assigning responsibility and due dates, collecting digital signatures from installer, A2O, and client, and exporting reports for handover or compliance.

by Roman Fedenko, from the Community

Get