Template

NCC 2019 Building Compliance Audit Checklist

by Luke Clasby, from the Community

This building compliance audit checklist helps inspectors and compliance auditors assess Class 2 to 9 buildings against the National Construction Code and relevant Australian Standards. It guides site inspections across core areas including structure, fire safety, access and egress, services and equipment, health and amenity, ancillary provisions, and special use buildings. The tool supports field data capture with clear sections for observations, measurements and recommendations, enabling consistent reporting and monthly tracking of results and follow up actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
NCC Volume 1 Checklist
This NCC Volume 1 checklist helps building professionals review key compliance areas within the National Construction Code for Class 2–9 buildings. It covers fire resistance and stability, compartmentation and protection of openings; access and egress requirements including provisions for people with disability; services and equipment such as fire fighting, smoke hazard management, lifts, and emergency systems; health and amenity including damp and weatherproofing, sanitary facilities, light and ventilation, sound insulation, and condensation management; ancillary provisions for minor structures, atriums, alpine and bushfire areas; special use buildings; and energy efficiency across building fabric, sealing, HVAC, lighting, hot water, and monitoring. Use this guide to streamline audits and document understanding of Deemed-to-Satisfy Provisions.
by Aven Watson, from the Community
Downloads: 10+
Get
Template
Class 2 to 9 Construction Site Audit Checklist
Use this Class 2 to 9 construction site audit to assess building work and compliance with the Building Code of Australia and National Construction Code, relevant regulations, and Australian Standards. Inspect excavation and shoring, basement structure, slabs, drainage, and car park clearances. Verify fire compartmentation and separation, roof and downpipe details, balcony falls and waterproofing in line with AS 4654.2, and balustrade heights. Capture photos, take measurements with laser or tape, compare against approved plans, record findings, and document issues and recommendations to maintain monthly compliance tracking.
by Dominic Hides, from the Community
Downloads: 20+
Get
Template
NCC Volume 1 Compliance Checklist
This template helps construction teams assess compliance with NCC Volume 1 across key areas of commercial building design and construction. It covers fire resistance and compartmentation, protection of openings, access and egress, accessibility for people with disability, services and equipment, visibility and warning systems, health and amenity, sanitary facilities, room heights, light and ventilation, sound transmission and condensation management. It also includes ancillary provisions for special use buildings and guidance on energy efficiency for building fabric, sealing, HVAC, lighting and water heating. Use it to document findings, note nonconformances, and track corrective actions.
by Aven Watson, from the Community
Downloads: 0
Get
Template
Hazard Inspection Checklist for Office Buildings
This hazard inspection checklist helps teams assess and control risks in office buildings and similar workplaces. It covers fire protection, evacuation readiness, first aid provisions, electrical safety, clear signage, storage and handling of hazardous substances, noise considerations, personal protective equipment, equipment and ladder condition, amenities and cleanliness, ergonomic workstation setup, lighting, and general building and exterior conditions. The template supports routine inspections, evidence capture, action tracking, and verification by safety committees. Use it to plan and record risk assessments before and after controls to ensure hazards are reduced and safety compliance improves.
by Holly Davison, from the Community
Downloads: 10+
Get

NCC 2019 Building Compliance Audit Checklist

About author

You might also like

NCC Volume 1 Checklist

Class 2 to 9 Construction Site Audit Checklist

NCC Volume 1 Compliance Checklist

Hazard Inspection Checklist for Office Buildings

You might also like

NCC Volume 1 Checklist

Class 2 to 9 Construction Site Audit Checklist

NCC Volume 1 Compliance Checklist

Hazard Inspection Checklist for Office Buildings