Template

Aerial Equipment Inspection Checklist

by Benjamin Rhode, from the Community

Use this aerial equipment inspection checklist to evaluate physical damage and defects, verify hydraulic and fuel systems, test operating controls and interlocks, and confirm required labels, manuals, and rated capacity are present. Include a site and workplace survey for ground conditions, obstacles, and power lines, and complete setup steps such as outriggers before cycling the lift. Standardize pre-use and periodic inspections to improve safety and support ANSI A92 compliance and recordkeeping.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Aerial Lift Pre Use Inspection Checklist
This aerial lift pre use inspection checklist helps crews verify equipment readiness and site safety before work at height. It covers pre shift checks for leaks, damage, guards, manuals, anchors, and PPE; function tests for lift, lower, tilt, manual lowering, horn, lights, and controls; and a workplace review for overhead and ground hazards, terrain, traffic, and weather. Use it to document findings and correct issues before operating the lift.
by Ryan Arnold, from the Community
Downloads: 10+
Get
Template
STRUCTURAL Aerial Lift Inspection Checklist
Use this aerial lift inspection checklist to verify MEWP readiness before operation. The template guides you through control checks, emergency stop and lowering, guard rails, platform condition, decals, alarms, tires and brakes, battery and fluid levels, outriggers, operator PPE, weather and ground conditions, electrical and chemical hazards, overhead obstructions, capacity limits, and traffic controls. Document inspector details and confirmations to improve safety, compliance, and equipment reliability.
by Mara Danzer, from the Community
Downloads: 10+
Get
Template
Scissor Lift and Boom Lift Inspection
This scissor lift and boom lift inspection template helps operators and supervisors complete thorough pre-use checks for aerial work platforms. It covers operator authorization and PPE, site conditions, platform integrity, guardrails and gates, labels and manuals, fluids and leak checks, electrical and hydraulic systems, lights, horns, emergency and ground controls, brakes, and functional tests. Use it to identify defects, document findings, and approve or remove equipment from service to improve safety, reduce downtime, and maintain compliance with standards.
by Melanie Burant, from the Community
Downloads: 20+
Get
Template
Aerial Lift Daily Inspection Checklist
This aerial lift daily inspection checklist helps crews verify lift safety before operation. Capture equipment and project details, confirm operator training and fall protection, ensure the platform gate is closed, and that the unit is on level ground. Check that tools are secured, lifting capacity is visible, and lanyards are anchored correctly. Perform a pre-start inspection, look for cracks or structural damage, and test all controls and warning devices. Verify clearances around the lift and maintain safe distances from power lines. Includes operator and auditor signatures.
by Bob Weis, from the Community
Downloads: 10+
Get

Aerial Lift Pre Use Inspection Checklist

This aerial lift pre use inspection checklist helps crews verify equipment readiness and site safety before work at height. It covers pre shift checks for leaks, damage, guards, manuals, anchors, and PPE; function tests for lift, lower, tilt, manual lowering, horn, lights, and controls; and a workplace review for overhead and ground hazards, terrain, traffic, and weather. Use it to document findings and correct issues before operating the lift.

by Ryan Arnold, from the Community

10+

Get

Template

STRUCTURAL Aerial Lift Inspection Checklist

Use this aerial lift inspection checklist to verify MEWP readiness before operation. The template guides you through control checks, emergency stop and lowering, guard rails, platform condition, decals, alarms, tires and brakes, battery and fluid levels, outriggers, operator PPE, weather and ground conditions, electrical and chemical hazards, overhead obstructions, capacity limits, and traffic controls. Document inspector details and confirmations to improve safety, compliance, and equipment reliability.

by Mara Danzer, from the Community

10+

Get

Template

Scissor Lift and Boom Lift Inspection

This scissor lift and boom lift inspection template helps operators and supervisors complete thorough pre-use checks for aerial work platforms. It covers operator authorization and PPE, site conditions, platform integrity, guardrails and gates, labels and manuals, fluids and leak checks, electrical and hydraulic systems, lights, horns, emergency and ground controls, brakes, and functional tests. Use it to identify defects, document findings, and approve or remove equipment from service to improve safety, reduce downtime, and maintain compliance with standards.

by Melanie Burant, from the Community

20+

Get

Template

Aerial Lift Daily Inspection Checklist

This aerial lift daily inspection checklist helps crews verify lift safety before operation. Capture equipment and project details, confirm operator training and fall protection, ensure the platform gate is closed, and that the unit is on level ground. Check that tools are secured, lifting capacity is visible, and lanyards are anchored correctly. Perform a pre-start inspection, look for cracks or structural damage, and test all controls and warning devices. Verify clearances around the lift and maintain safe distances from power lines. Includes operator and auditor signatures.

by Bob Weis, from the Community

10+

Get

Aerial Equipment Inspection Checklist

About author

You might also like

Aerial Lift Pre Use Inspection Checklist

STRUCTURAL Aerial Lift Inspection Checklist

Scissor Lift and Boom Lift Inspection

Aerial Lift Daily Inspection Checklist

You might also like

Aerial Lift Pre Use Inspection Checklist

STRUCTURAL Aerial Lift Inspection Checklist

Scissor Lift and Boom Lift Inspection

Aerial Lift Daily Inspection Checklist