Temporary Works Essentials for Construction Site Safety

What are Temporary Works?

Temporary works are engineered, non-permanent structures used to facilitate construction, provide access, or maintain the stability of the permanent works during the build. Although critical for safety and execution, they don’t form part of the final building and are removed once the permanent structure is self-supporting.

Importance

While temporary works in construction have been essential since the Middle Ages, the discipline only gained formal recognition in the 1970s following a series of catastrophic falsework collapses in the UK. Since then, ancillary structures have been recognized as a critical safety component in construction that requires the same level of design and management as permanent ones.

Here are some specifics:

• Provides structural support : Concrete should be stabilized with appropriate falsework and formwork during the curing period. Neglect or carelessness can lead to the collapse of temporary wet concrete molds, such as the Verulam temple tragedy .

• Allows worker access : Scaffolding, hoists, and platforms enable construction teams to navigate the site and do the tasks safely. When these aren’t properly installed, accidents will occur.

• Increases project efficiency : Temporary works allow access to elevated or confined areas, keeping schedules on track across sites. They also help minimize rework and delays, optimizing resource use in multi-site projects.

• Ensures safety : Failures cause disproportionate hazards that could lead to fatalities, as evidenced by reports from the UK's Health and Safety Executive (HSE). Adhering to temporary works building standards can prevent these unfortunate risks.

• Strengthens build quality : Precision and alignment for final designs begin with well-planned shoring, formworks, and shuttering systems. Even minor mistakes at this phase can lead to permanent defects once the actual build begins.

Types of Temporary Solutions in Construction

Temporary construction structures vary by function. Workers should understand the differences to ensure correct installation and rigorous safety management, as even minor errors can lead to problematic site failures.

Scaffolding

Workers can safely perform tasks at height (e.g., masonry, painting, or facade installation) with these temporary access and working platforms. Safety efforts in scaffolding should be concentrated on the following:

• Structural stability and correct load capacity

• Proper erection, handled by competent persons

• Presence of guardrails, toe boards, and safe access

• Regular inspections to detect loose fittings or damage

Shoring

Existing structures or excavated walls are prevented from collapsing during build, repair, or demolition activities with this temporary works solution. These are some of the primary safety objectives with shoring:

• Appropriate design to resist soil and structural loads

• Correct installation sequence

• Monitoring ground movement and settlement

Formwork

Wet concrete takes a while to cure and dry. This is molded and supported using formwork while it gains sufficient strength to support itself. The focal point of this construction aid should be the following:

• Strength and rigidity to resist concrete pressure

• Secure connections and bracing

• Safe access for pouring and inspection

• Preventing premature removal that could cause collapse

Falsework

Truss systems in bridges, Acrow props in floor slabs, and pre-engineered raking shores for walls temporarily support permanent, existing structures during major repairs. Because the risk of a total structural failure is too great, safety management must be focused on these aspects:

• Accurate load calculations and design approval

• Stable foundations for props and frames

• Controlled loading and striking procedures

Site hoardings

These create a secure boundary around construction sites. Aside from controlling site access, this interim installation protects the general public. One of the most disregarded types of temporary works, protocols should include the following:

• Structural stability against wind loads

• Secure gates and access points to prevent unauthorized entry

• Clear signage and visibility

What Regulations and Standards Govern Temporary Works?

Regulations governing temporary works planning, execution, and monitoring have significantly expanded since the Bragg Report. Aside from clearer duties for design, coordination, and control, modern frameworks emphasize accountability and risk management throughout the construction lifecycle.

Best Practices

Devastating construction failures often result from treating temporary structures as low-risk systems. Safeguarding lives and assets requires discipline from temporary works planning to final decommissioning. Take note of the following to minimize potential risks:

• Appoint competent coordinators to manage temporary works safely: A qualified Temporary Works Coordinator (TWC) oversees all temporary works activities. With a central point person for approvals, the team can prevent design gaps, unsafe sequencing, and uncontrolled changes.

• Conduct thorough risk assessments before work begins: Failure often stems from overlooked site-specific risks rather than design errors. Systematically evaluating risk identifies hazards related to loads, ground conditions, interfaces, and sequencing.

• Implement formal design checks for all temporary works : Ancillary structures should withstand expected and accidental loads. Independent checks and approvals based on relevant standards and codes should be done before installation.

• Schedule regular inspections throughout the lifecycle: Conditions change rapidly on construction sites, increasing failure risk over time. On top of the initial checks, the different types of temporary works in construction should be inspected at every stage: installation, use, modification, and after adverse events.

• Train and communicate clearly with all site teams: Misuse, unauthorized alterations, or misunderstanding of limits are often due to a lack of specific knowledge. All relevant personnel, from supervisors to frontline workers, should receive targeted site safety training and attend daily induction meetings before work begins.

• Plan safe dismantling and removal from the start: The highest risk often occurs during striking or removal, not during use. Dismantling procedures should have been developed during the design and planning phase so workers can follow controlled sequences.

• Maintain accurate documentation and control records: All work documents should be properly maintained and accessible on site, as these provide traceability, accountability, and legal protection.

Byblos Construction, a top-rated construction and mining service in Western Australia, has achieved their “Zero Harm” goals after undergoing significant digital transformation. Leveraging a cloud-based platform with real-time mobile communication and inspections streamlined asset tracking, immediate hazard reporting, and data-driven accountability, allowing teams to verify structural integrity and safety protocols instantly across remote sites.

Byblos Construction digitized safety checklists, compliance checks, and risk assessments with SafetyCulture, letting teams quickly notify leaders of risks for faster action and fewer blind spots. This improved risk management, communication, and visibility for safer job sites.

Read success story

Read success story