Template

Post Eaves and Cladding Report Checklist

This post eaves and cladding report checklist helps site supervisors record quality checks after installation. Capture location, client, date, photos, and signatures. Verify sarking and alcor at corners and windows, check eaves parallel to brickwork, ensure cladding is level, gaps are filled, nails are correctly set, and fibro nails are placed to centers. Note extra work, window setout for 10 mm plasterboard, and overall quality rating. Upload final photos and document any issues.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Pre Cladding Material Inspection Checklist

Use this pre cladding material inspection to confirm site readiness before exterior cladding begins. Verify delivery of cladding, flashings, mouldings, and framing materials. Check specifications and sheet sizes. Confirm sarking and roofing are complete and scaffolding is organized. Photograph services and orders. Ensure supervisor sign off, record plan changes and bin capacity, and log defect items so the crew can start safely and efficiently.

by sean alston, from the Community

Get

Template

A2O Built-up Wall Cladding QA Checklist

This A2O built-up wall cladding quality assurance checklist guides teams through storage, installation, and completion checks. Verify liner panels are correctly fixed at eaves, joints, and heads; ensure foam fillers and mastic are installed for airtight seals; confirm side laps are sealed and stitched; interlock and fix spacer systems; maintain continuous insulation; and secure outer cladding at required intervals. Capture photos, assign corrective actions, and finalize with digital signatures from installer, A2O, and client. Export reports as PDF, Word, Excel, or web link.

by William Carter, from the Community

10+

Get

Template

Cladding Handover Checklist

This cladding handover checklist helps construction teams verify the quality and completeness of exterior cladding before practical completion. Cover key items such as Tyvek installation, bracket and rail fixing, fire barrier placement, insulation, panel alignment and finish, and sealant checks. Record issues with notes and photos, document client and site details, and capture sign-off to confirm compliance. Use it to standardize inspections, reduce defects, and ensure a clean, professional handover.

by Corneliu Calimanescu, from the Community

10+

Get

Template

Cladding SHEQ Inspection and Progress Report

Use this Cladding SHEQ Inspection and Progress Report to assess roof and wall cladding works against safety, health, environment and quality requirements. Verify RAMS and briefings, check scaffolding and safety netting, edge protection and housekeeping, confirm correct fixings, seals, flashings and insulation, and document plant certifications and daily checks. Track programme status, materials, variations and completion forecasts, capture issues and good practices, and record sign offs from site supervisors and managers.

by Phill Callaghan, from the Community

10+

Get

Template

Cladding Installation Checklist

This cladding installation checklist helps supervisors and installers verify key requirements before and after cladding work. Confirm clearances, wall wrap, and window positioning, then check head and side flashings, corner flashings, sealants, architraves, and bottom flashings. Validate joint materials and consistent joint widths, ensure penetrations are sealed, and note any damage to panels, windows, flashings, or roofs. Capture comments and media, then complete sign off with date and supervisor signature.

by Ganesan Gopal, from the Community

10+

Get

Template

Internal Roofing and Cladding Quality Report

This internal roofing and cladding quality report template guides thorough inspections across key areas of a roof installation. It covers substrate readiness, wire safety mesh, eaves and box gutters, insulation and rockwool, sisalation, metal roofing alignment and fixings, translucent sheeting, and flashings. Inspect mechanical penetrations, parapet lining, debris from other trades, and wall sheeting, then record actions required and due dates for rectification. Use this checklist to verify workmanship, prevent defects, and ensure compliance with relevant standards.

by Deanne Van Der Westen, from the Community

10+

Get